Once you locate pin 8, thats the pin we will be using as well as the next one over. One side will have the digit 1 and the other digit 8 Locate pin 8 which will have a number on the side of the board. I will post up pics and give you the DIY when I get a chance.Its actually very simple that any average person can do that has access to a drill and a soldering gun.ġSmall philip screwdriver to take the D-can cover offĢRadio Shack micro on/off switch (can be two prongs or three) and some wire 24 guage.ĥDrill bit 5/16 to make hole in the D-can cover So for 2 bucks at Radio Shack and about 20 minutes of my time, I have a fully functional cable for both applications! My cable did not come with an adapter… 2/2007 and older vehicles requires the pin 7 and 8 to be bridged to work.3/2007 and later requires pin 7 and 8 to be separate. I modified my D-can cable and installed a switch in order to have it operational with 2006 and earlier models that use the OBDII port.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |